ISBN: 1846280559

Autor: Ioan D. Landau, Gianluca Zito. Erscheinungsdatum: 20051013. Sprache: englisch. He was a R. Springer Professor at University of. He received the. Nachträgliche Adressänderungen sind… More...

Autor: Ioan D. Landau, Gianluca Zito. Erscheinungsdatum: 20051013. Sprache: englisch. He was a R. Springer Professor at University of. He received the. Nachträgliche Adressänderungen sind leider nicht möglich. Bücher tolino Hörbücher Film Musik Spielwaren Newsletter Fenster schließen Fenster schließen Fenster schließen Fenster schließen Fenster schließen Digital Control Systems | Ioan D. Landau, Gianluca Zito | englisch | NEU Design, Identification and Implementation. 1st edAutor: Ioan D. Landau, Gianluca ZitoFormat: gebundenSeitenanzahl: XXIVVerlag: Springer-Verlag GmbHErscheinungsdatum: 20051013Sprache: englischGenre: Importe, ImporteSerie: Communications and Control Engineering, Communications and Con...Höhe in mm: 35Länge in mm: 243Breite in mm: 163Gewicht in g: 891 BeschreibungThe extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of applications has brought about important changes in the design of control systems. Their performance and their low cost make them suitable for use in control systems of various kinds which demand far better capabilities and performances than those provided by analog controllers. However, in order really to take advantage of the capabilities of microprocessors, it is not enough to reproduce the behavior of analog (PID) controllers. One needs to implement specific and high-performance model based control techniques developed for computer-controlled systems (techniques that have been extensively tested in practice). In this context identification of a plant dynamic model from data is a fundamental step in the design of the control system. The book takes into account the fact that the association of books with software and on-line material is radically changing the teaching methods of the control discipline. Despite its interactive character, computer-aided control design software requires the understanding of a number of concepts in order to be used efficiently. The use of software for illustrating the various concepts and algorithms helps understanding and rapidly gives a feeling of the various phenomena.Portrait Ioan Doré Landau is Research Director (Emeritus) at C.N.R.S.(National Centre for Scientific Research) and works at the Laboratoire d'Automatique de Grenoble (CNRS/INPG) of the Institut National Polytechnique de Grenoble.His research interests encompass theory and applications in system identification, adaptive control, robust digital control and nonlinear systems. He has authored and co-authored over 200 papers on these subjects. He is the author of the books: Adaptive Control: The Model Reference Appoach (Dekker 1979) and translated into Chinese, System Identification and Control Design (Hermès 1993, Prentice Hall 1990). and co-author of the books (with M. Tomizuka) Adaptive Control: Theory and Practice (in Japanese - Ohm 1981) and (with R. Lozano and M. M'Saad) Adaptive Control (Springer Verlag 1997). He edited and co-edited several books in French on the above topics including a series on "Mathematical Tools for Control, System Analysis and Signal Processing and Models" and one on "Adaptive Control". He holds several patents and was at the origin of several software packages in control developed by ADAPTECH. He has advised 29 PhD students. He delivered a number of Plenary Talks at International Conferences including American Control Conference in Seattle in 1995. He was the key note speaker at the European Control Conference in Bruxelles in 1997.Dr. Landau received the Rufus Oldenburger Medal 2000 from the American Society of Mechanical Engineering in recognition of significant contributions to the field of automatic control for his pioneering contributions in adaptive control and system identification. He was a R. Springer Professor at University of .California. (Berkeley) Department of Mechanical Engineering in 1992. He received the pris Monpetit from the French Academy of Science in 1991, the "Best Review Paper Award (1981-84)" for his paper on adaptive control published in ASME Journal of Dynamical Versand Versand Versand Ihre Bestellung wird durch die Deutsche Post AG oder DHL versandt. Als Vertragspartner ist für Sie immer die Hugendubel Digital GmbH & Co. KG der Ansprechpartner. Der Versand kann ca. 1-4 Werktage in Anspruch nehmen. Lieferadresse Lieferadresse Lieferadresse Nachträgliche Adressänderungen sind leider nicht möglich. Bitte kontrollieren Sie Ihre Lieferanschrift bevor Sie bestellen. Aus technischen Gründen können wir das ?Nachricht hinzufügen-Feld? nicht auswerten. Rückgabe Rückgabe Rückgabe Sie haben nach Empfang Ihrer Ware ein einmonatiges Widerrufsrecht. Zur Wahrung der Widerrufsfrist reicht es aus, dass Sie die Mitteilung über die Ausübung des Widerrufsrechts vor Ablauf der Widerrufsfrist absenden. Online-Bestellung per Postversand retournieren Sie bitte an: Hugendubel.de Service-Center Europaallee 1 36244 Bad Hersfeld Bitte fügen Sie der Rücksendung einen Nachweis über den Einkauf bei, damit wir die Ware zuordnen können. Storno Storno Storno Die Daten Ihrer Bestellung werden innerhalb weniger Minuten an unsere Logistik übergeben. Daher können wir Ihre Stornierung in den meisten Fällen nicht bearbeiten. Sie können einfach die Annahme ihrer Lieferung verweigern oder von Ihrem Rückgaberecht Gebrauch machen. , Festpreisangebot, [LT: FixedPrice], EAN: 9781846280559, Marke: Markenlos, Format: BB, Produktart: gebunden, Unterkategorie: Kybernetik und Systemtheorie, Auflage: 1st ed, Höhe (mm): 35, Anzahl Seiten: XXIV, Breite (mm): 163, Publikationsname: Digital Control Systems, Untertitel: Design, Identification and Implementation, Teiletyp: BUCH, Kollektion: Communications and Control Engineering, Communications and Con... Länge (mm): 243, Markenlos<

ISBN: 9781846280559

Kochen & Backen. Ioan D. Landau. Kunst & Fotografie. Industrie Chemische Industrie Industrie / Chemische Industrie Elektrotechnik Elektrogerät Elektronik / Gerät Elektronik - Elektroniker… More...

Kochen & Backen. Ioan D. Landau. Kunst & Fotografie. Industrie Chemische Industrie Industrie / Chemische Industrie Elektrotechnik Elektrogerät Elektronik / Gerät Elektronik - Elektroniker Regelungstechnik Roboter - Robotik - Industrieroboter. Weitere Kategorien ☰ Belletristik Beruf & Karriere Biografien Fachbücher, Lernen & Nachschlagen Gesundheit und Diät Kinder & Jugendbücher Kochen & Backen Kunst & Fotografie Reisen Sachbücher & Ratgeber Sport Digital Control Systems - Ioan D. Landau Versandkostenfrei! Wir liefern diesen Artikel portofrei innerhalb Deutschlands   Weitere Bücher: Ioan D. Landau of this publishing house Mehr zum Thema Steuerung (elektronisch) Informationstheorie Kybernetik Systemtheorie Ingenieurwissenschaft - Ingenieurwissenschaftler Maschinenbau Chemie / Technik Werkstoffe Berufe Industrie Chemische Industrie Industrie / Chemische Industrie Elektrotechnik Elektrogerät Elektronik / Gerät Elektronik - Elektroniker Regelungstechnik Roboter - Robotik - Industrieroboter Produktdetails Art Nr.: 1846280559 ISBN 13: 9781846280559 Subtitle: Design, Identification and Implementation Release year: 2005 Published by: Springer-Verlag Gmbh Edition: Buch Cover: Buch Cover Format: 243x163x35 mm Pages: 484 Weight: 891 g Language: Englisch Author: Ioan D. Landau Beschreibung The extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of applications has brought about important changes in the design of control systems. Their performance and their low cost make them suitable for use in control systems of various kinds which demand far better capabilities and performances than those provided by analog controllers. However, in order really to take advantage of the capabilities of microprocessors, it is not enough to reproduce the behavior of analog (PID) controllers. One needs to implement specific and high-performance model based control techniques developed for computer-controlled systems (techniques that have been extensively tested in practice). In this context identification of a plant dynamic model from data is a fundamental step in the design of the control system. The book takes into account the fact that the association of books with software and on-line material is radically changing the teaching methods of the control discipline. Despite its interactive character, computer-aided control design software requires the understanding of a number of concepts in order to be used efficiently. The use of software for illustrating the various concepts and algorithms helps understanding and rapidly gives a feeling of the various phenomena. Informationen über den Autor Ioan Doré Landau is Research Director (Emeritus) at C.N.R.S.(National Centre for Scientific Research) and works at the Laboratoire d'Automatique de Grenoble (CNRS/INPG) of the Institut National Polytechnique de Grenoble.His research interests encompass theory and applications in system identification, adaptive control, robust digital control and nonlinear systems. He has authored and co-authored over 200 papers on these subjects. He is the author of the books: Adaptive Control: The Model Reference Appoach (Dekker 1979) and translated into Chinese, System Identification and Control Design (Hermès 1993, Prentice Hall 1990). and co-author of the books (with M. Tomizuka) Adaptive Control: Theory and Practice (in Japanese - Ohm 1981) and (with R. Lozano and M. M'Saad) Adaptive Control (Springer Verlag 1997). He edited and co-edited several books in French on the above topics including a series on "Mathematical Tools for Control, System Analysis and Signal Processing and Models" and one on "Adaptive Control". He holds several patents and was at the origin of several software packages in control developed by ADAPTECH. He has advised 29 PhD students. He delivered a number of Plenary Talks at International Conferences including American Control Conference in Seattle in 1995. He was the key note speaker at the European Control Conference in Bruxelles in 1997. Dr. Landau received the Rufus Oldenburger Medal 2000 from the American Society of Mechanical Engineering in recognition of significant contributions to the field of automatic control for his pioneering contributions in adaptive control and system identification. He was a R. Springer Professor at University of .California. (Berkeley) Department of Mechanical Engineering in 1992. He received the pris Monpetit from the French Academy of Science in 1991, the "Best Review Paper Award (1981-84)" for his paper on adaptive control published in ASME Journal of Dynamical Systems Measurement and Control, the C.N.R.S. Silver Medal in 1982 and the Great Gold Medal at the Invention Exibition Vienna in 1968 for his patent on the variable frequency control of asynchronous motors. He received the degree of Docteur-des-Sciences Physiques from the University of Grenoble. Before joining the C.N.R.S. in 1976 as research director, he was an Associate Professor at the Institut National Polytechnique de Grenoble from 1973 to 1976, a Senior Post-doctoral Research Associate at NASA - Ames Research Center in 1971-72 and a research engineer at ALSTHOM in 1969-71 and 72-73. At C.N.R.S. he launched several coordinated programs in the field of Control which contributed to the emergence and development of the French control community. He was the Director of the co-ordinated research programs: "Mathematical Tools and Models for Control, System Analysis and Signal Processing" from 1979 to 1982, "Adaptive Systems in Control and Signal Processing" from 1984 to 1988 and "Automatique" from 1988 to 1996. He was also Director of the Laboratoire d'Automatique de Grenoble from 1987 to 1990. Dr. Landau was the General Chairman of the first European Control Conference organised in Grenoble in 1991. He was one of the founders and the first President of the European Community Control Association (ECCA) from 1991 to 1993 (now EUCA) and he was Editor in Chief of the European Journal of Control (a publication of the European Union Control Association) from 1994 to the end of 2002. In June 1998 the CNRS organized an international colloquium in his honor "Perspectives in Control - Theory and Applications". The proceedings of the colloqium (Normand-Cyrot, Ed., Perspectives in Control 1-85233-042-2) were published by Springer. Unsere Angebote Belletristik Beruf & Karriere Biografien Fachbücher, Lernen & Nachschlagen Gesundheit und Diät Kinder & Jugendbücher Kochen & Backen Kunst & Fotografie Reisen Sachbücher & Ratgeber Sport Powered by INFORIUS , Neu, Festpreisangebot, [LT: FixedPrice], Seiten: 484, Gewicht: 891, Einband: Buch, Format: 243x163x35 mm, Sprache: Englisch, Marke: Springer-Verlag Gmbh, Fachbereich: Hardcover/Naturwissenschaften, Medizin, Informatik, Technik/Te... Publikationstitel: Digital Control Systems, Produktart: Bücher, Buchtitel: Digital Control Systems, Publikationsname: Digital Control Systems, Springer-Verlag Gmbh, 20051013<

ISBN: 9781846280559

He has authored and co-authored over 200 papers on these subjects. He has advised 29 PhD students. He was a R. Springer Professor at University of. He received the degree of Docteur-des-S… More...

He has authored and co-authored over 200 papers on these subjects. He has advised 29 PhD students. He was a R. Springer Professor at University of. He received the degree of Docteur-des-Sciences Physiques from the University of Grenoble. Digital Control SystemsIoan D. Landau Art Nr.: 1846280559 ISBN 13: 9781846280559 Subtitle: Design, Identification and Implementation Release year: 2005 Published by: Springer-Verlag Gmbh Edition: Buch Cover: Buch Cover Format: 243x163x35 mm Pages: 484 Weight: 891 g Language: Englisch Author: Ioan D. Landau Description The extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of applications has brought about important changes in the design of control systems. Their performance and their low cost make them suitable for use in control systems of various kinds which demand far better capabilities and performances than those provided by analog controllers. However, in order really to take advantage of the capabilities of microprocessors, it is not enough to reproduce the behavior of analog (PID) controllers. One needs to implement specific and high-performance model based control techniques developed for computer-controlled systems (techniques that have been extensively tested in practice). In this context identification of a plant dynamic model from data is a fundamental step in the design of the control system. The book takes into account the fact that the association of books with software and on-line material is radically changing the teaching methods of the control discipline. Despite its interactive character, computer-aided control design software requires the understanding of a number of concepts in order to be used efficiently. The use of software for illustrating the various concepts and algorithms helps understanding and rapidly gives a feeling of the various phenomena. Information of Author Ioan Doré Landau is Research Director (Emeritus) at C.N.R.S.(National Centre for Scientific Research) and works at the Laboratoire d'Automatique de Grenoble (CNRS/INPG) of the Institut National Polytechnique de Grenoble.His research interests encompass theory and applications in system identification, adaptive control, robust digital control and nonlinear systems. He has authored and co-authored over 200 papers on these subjects. He is the author of the books: Adaptive Control: The Model Reference Appoach (Dekker 1979) and translated into Chinese, System Identification and Control Design (Hermès 1993, Prentice Hall 1990). and co-author of the books (with M. Tomizuka) Adaptive Control: Theory and Practice (in Japanese - Ohm 1981) and (with R. Lozano and M. M'Saad) Adaptive Control (Springer Verlag 1997). He edited and co-edited several books in French on the above topics including a series on "Mathematical Tools for Control, System Analysis and Signal Processing and Models" and one on "Adaptive Control". He holds several patents and was at the origin of several software packages in control developed by ADAPTECH. He has advised 29 PhD students. He delivered a number of Plenary Talks at International Conferences including American Control Conference in Seattle in 1995. He was the key note speaker at the European Control Conference in Bruxelles in 1997. Dr. Landau received the Rufus Oldenburger Medal 2000 from the American Society of Mechanical Engineering in recognition of significant contributions to the field of automatic control for his pioneering contributions in adaptive control and system identification. He was a R. Springer Professor at University of .California. (Berkeley) Department of Mechanical Engineering in 1992. He received the pris Monpetit from the French Academy of Science in 1991, the "Best Review Paper Award (1981-84)" for his paper on adaptive control published in ASME Journal of Dynamical Systems Measurement and Control, the C.N.R.S. Silver Medal in 1982 and the Great Gold Medal at the Invention Exibition Vienna in 1968 for his patent on the variable frequency control of asynchronous motors. He received the degree of Docteur-des-Sciences Physiques from the University of Grenoble. Before joining the C.N.R.S. in 1976 as research director, he was an Associate Professor at the Institut National Polytechnique de Grenoble from 1973 to 1976, a Senior Post-doctoral Research Associate at NASA - Ames Research Center in 1971-72 and a research engineer at ALSTHOM in 1969-71 and 72-73. At C.N.R.S. he launched several coordinated programs in the field of Control which contributed to the emergence and development of the French control community. He was the Director of the co-ordinated research programs: "Mathematical Tools and Models for Control, System Analysis and Signal Processing" from 1979 to 1982, "Adaptive Systems in Control and Signal Processing" from 1984 to 1988 and "Automatique" from 1988 to 1996. He was also Director of the Laboratoire d'Automatique de Grenoble from 1987 to 1990. Dr. Landau was the General Chairman of the first European Control Conference organised in Grenoble in 1991. He was one of the founders and the first President of the European Community Control Association (ECCA) from 1991 to 1993 (now EUCA) and he was Editor in Chief of the European Journal of Control (a publication of the European Union Control Association) from 1994 to the end of 2002. In June 1998 the CNRS organized an international colloquium in his honor "Perspectives in Control - Theory and Applications". The proceedings of the colloqium (Normand-Cyrot, Ed., Perspectives in Control 1-85233-042-2) were published by Springer. Powered by INFORIUS , Neu, Festpreisangebot, [LT: FixedPrice], Seiten: 484, Gewicht: 891, Einband: Buch, Marke: Springer-Verlag Gmbh, Fachbereich: Hardcover/Naturwissenschaften, Medizin, Informatik, Technik/Te... Publikationstitel: Digital Control Systems, Produktart: Bücher, Buchtitel: Digital Control Systems, Publikationsname: Digital Control Systems, EAN: 9781846280559, Springer-Verlag Gmbh<

ISBN: 9781846280559

Hardback, [PU: Springer London Ltd], The extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of app… More...

Hardback, [PU: Springer London Ltd], The extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of applications has brought about important changes in the design of control systems., Automatic Control Engineering<